How To Boot Windows 10 Into Safe Mode?

Picture Of Boot Windows 10 To Safe mode

Safe mode is an approach to rectify issues you might have with your system. It is a restricted environment that prevents damage from getting any worse.

This is a kind of quarantine technique that allows you to determine which application may be the cause of the issues you are experiencing.

There a quite a number of ways to enter safe mode in windows 10. Read up to know how windows 10 safe mode.

How Can I Boot Windows 10 In Safe Mode? Basically, there are three ways to access safe mode in windows 10. You can enter safe mode from the log-in screen, or you can enter safe mode from the normal node. Lastly, you can enter safe mode from a blank screen.

The issues you are facing with your system would determine how you want to enter safe mode in your windows 10 computer.

There are three different ways to start windows 10 in safe mode.

How to Boot Windows 10 Into Safe Mode?

1. From The Normal Mode:

You can do this either through the settings menu. Lunch the settings menu by pressing the windows button alongside the power button on your keyboard. Then select update and security.

Click on recovery, a panel will open up on the right. Select the ‘restart now’ option under the advanced start-up. This will take you to the windows recovery environment. Select the troubleshoot option on the Windows RE, then select the advanced option. Under advanced options, select startup settings and click Restart.

Your computer will then restart and a screen with different startup options will open. Here you either press 4 on your keyboard (if you won’t be needing an internet connection) or select number 5 (if you will be needing network access).

Another alternative to this is to press the windows button + R on your keyboard, then type in “msconfig” into the dialogue box and click ok. The system configuration settings would be opened and here, you then navigate to the boot tab.

In the boot tab, you check the safe boot option and then you will be prompted to restart your system. Click restart and then your system would restart into safe mode.

2. Via the Log-in Screen:

This is suitable for cases when you just started your system and it doesn’t seem to be functioning properly. Follow the steps below to boot your system into safe mode from the sign in screen

  • On the sign-in screen, hold down the shift key and then while holding down the shift key, select the restart option from the power options in the bottom right corner.
  • Your system will restart and bring up the windows recovery environment.
  • Select the troubleshoot option on the Windows RE, then select the advanced option.
  • Under advanced options, select startup settings and click Restart.
  • Your computer will then restart and a screen with different startup options will open. Here you either press 4 on your keyboard (if you won’t be needing an internet connection) or select number 5 (if you will be needing network access).

3. From a Blank or Black Screen:

This is the approach you will use when your windows do not start normally. You might probably a blank or a black screen. Follow the steps highlighted below if your issue falls under this category.

  • First, ensure your computer is off. Then, turn on your system. Long press the power button until the system goes off. Repeat this process at least two times until you see the “preparing automatic repair” screen comes up.
  • Then, wait till windows finish diagnosing your system and click on the advanced option. This will bring up the windows recovery environment screen.
  • Select the troubleshoot option on the Windows RE, then select the advanced option.
  • Under advanced options, select startup settings and click Restart.
  • Your computer will then restart and a screen with different startup options will open. Here you either press 4 on your keyboard (if you won’t be needing an internet connection) or select number 5 (if you will be needing network access).

Why Do I Need To Enter Safe Mode And How To Exit Safe Mode?

Booting in safe mode might be the handy solution to the issues you are experiencing with your system. After trying out other troubleshooting technique, you definitely want to try out booting your computer in safe mode.

You can exit the safe mode by following the steps below;

  1. Press the windows button + R.
  2. A box will pop up. You then type in “msconfig” in the box and click ok.
  3. Navigate to the “Boot” tab
  4. Uncheck the “Safe boot” option.

What You Should Know About Windows 10 Reset

Most users who did a windows 7 or 8 upgrades to Windows 10 (without charge) purchased Personal Computers that have DVD for reset or partition in the hard drive for reset.

Usually, marketers such as Dell, HP and Lenovo makes this available for users rather than giving a Windows DVD to them for reinstallation purpose. The choice of doing a “reset” normally comes up before the booting of windows (or the “reset DVD” can be inserted).

When “factory reset” is done on the system, the hard disk is wiped out. Every data and the programs of all users are also cleared out with the reinstallation of windows.

The reinstallation of the system’s original O.S rather than Windows 10, is a major difference that should be noted. In essence, need to be careful when going for this option.